Modular Seals - Watertight Pipes Through Concrete Walls
Pipe sealing up to 80 ft. waterhead
Modular Seals
WA-Modular Seal Links - WA-Disc compression seals.
Pipe penetrations through foundation walls. Pressure sealing.
Seals for SDR pipes, Ductile iron pipe, Concrete, PVC, and Sewer pipes - low or high pressure pressing water seals.
Corrosion resistance, 316 stainless steel nuts and bolts..
Seal elastomer: EDPM, NBR elastomer for petroleum applications and Silicone elastomer for high temperature requirements.
WA-Disc Compression Seals
Seal more than one pipe through the same opening, watertight up to 36 psi of pressing water. Up to a 80 ft. of water head." D-LPS Models are Watertight up to 160 foot water head, see below.
Request email quote or call Westatlantic 1-902 455-4455
EDPM PUDDLE FLANGES
WA-EDPM puddle flanges are cast in new walls mounted to the pipe. Waterstops for pipe placed in concrete.
Cast in the floor slab around a pipe, puddle flanges prevent radon gas penetration.
READ MORE
Wall Sleeves non-metallic:
WA. ZVR CEMENT BONDING WALL SLEEVES
Engineered system for watertight pipe penetrations.
Read more on Cement-bonding-Wall Sleeves
WA.ZVR wall sleeves permanently bonds to the concrete and becomes an integrated part of the wall structure.
The wall sleeve exterior has a special fused incrementation coating that bonds with the concrete for a no leak around the sleeve. The annular space between the pipe and wall sleeve is made watertight by using a WA pipe seal.
A perfectly symmetrical entry point is formed for pipes and conduit passing through the structure.
The coating bonds perfectly homogeneously with the concrete.
WA.ZVR sleeves may be set in , block walls, concrete walls or cast in a wall opening using mortar.
Use in conjunction with modular seals, disc seals and press seals, watertight penetration for pipes, conduit or cables .
Generic drawing WA-Modular Leak Sealing for for pressing water:
Pipe Seal system advantages:
- Provides a 36 psi seal, 80 foot. head.
- Better seal integrity when higher head pressure is present.
- Corrosion resistance stainless steel hardware.
- Pipe seals for large or small annular spaces.
- Pipe seal sizing for all pipe diameters.
Pipe Disc Seals for pipe through concrete walls.
WA-Disc seal systems.
Westatlantic Tech Corp. offers a Compression Disc seal system;
WA-Disc seal sizing is determined by the pipe outside diamentes passing through an opening.
Disk sealing is used wherever a modular seal cannot be installed due to technical reasons.
Disc seal compression plates expand in the annular space for a complete water tight, gas tight and smoke tight system. Disc pipe seals allow small diameter and fraction diameter pipe and conduit to be made waterproof. The ID of the seal opening will match the OD of small diameter pipes.
WA-DL Link Modular Models: for 72 psi - 5 bar tight - 160 foot water head sealing.
WA-DL high pressure modular link seal elements are available for conditions where pressing water is greater than 36 psi.
Contact us for project pricing: email Westatlantic Tech Corp.
902 455 4455
modular seal links, repair, leaking. Leaking link seal repair, modular seals. Pipe not centered. Water proof pipe passing through concrete walls and floors. USA, Texas, TX, Florida, FL, Ohio, OH Oregon, OR, New York, NY. Canadian Regions and City availability; In Alberta, AB; Edmonton, Fort McMurray Calgary. British Colombia, BC; Kelowna, Vancouver, Prince Rupert, Kitimat. Saskatchewan, SK; Regina, Saskatoon, Prince Albert, Esrevan, Swift Current. Manitoba MB; Winnipeg, Thompson. Ontario, ON; Toronto, London, Ottawa, Hamilton, Quebec, QC; Montreal, Quebec City, Trois-Rieviers, Chebougamau, Sherbrooke. New Brunswick, NB, Nova Scotia, Newfoundland Labrador, NL, St John's, Goose bay, Long Harbour, Marystown.